TyreTechs is a unique blend of Non-toxic aqueous glycol based chemicals solution which includes fibers , polymers and comprising of rust inhibitors, preservatives and gums held in suspension. Once required amount of TyreTechs is installed into a tyre through the valve,  (The tyre is not deflated for this process) the TyreTechs is spread around the complete inside of the tyre (by rotational forces) sealing all porosity leaks, (Rubber is a naturally porous material,) bead and rim leaks. Once the inside of the tyre is completely coated with the TyreTechs; the tyre is then a completely air tight container. Thus, maintaining the optimum pressure for the full legal life of the tyre. TyreTechs, also helps to dissipate excess heat from the tread area of the tyre with no, effect on the working temperature of the tyre.

TyreTechs:

  • Effectively work as a tyre sealant without creating imbalance,  

  • Seal a puncture wound created by a puncturing object of up to 6mm in diameter in the tread area of a designated car tyre.

  • OR, created by a puncturing object up to 12mm  in diameter in the tread area of a designated commercial vehicle tyre.

  • Provide protection against air loss for the full legal life of the tyre.

  • Guaranted protects tyres against punctures and blow outs

  • Will not dry out

 If any tyre suffer deflation within the criteria, after being treated with TyreTechs, then  TyreTechs will repair or replace the tyre FREE of Charge.


Private use

Bad tyres kill. After bad brakes it is the single largest contributor to accidents. Sometimes as much as 60 per cent if you exclude the obvious top of the reason...overspeeding. And yet, most of us don't spare a thought for our tyres. That is what is called 'treading' dangerously

Caring for the tyres is critical for any driver and any disregard for them may not only endanger one's life but also that of others on the road.

Do we do it? No way. Not even one in ten. Some of us have owned cars for years and never checked the tyres unless there is a flat. Do it. The life you save could be yours.

The question is very simple; would you pay a small price to know you can drive your vehicle in the knowledge that you will not have a flat tyre due to punctures / or with low air pressure? Why would you NOT use such a amazing product if it could give you such peace of mind?

With a small cost TyreTechs will:

  • Give you peace of mind.
  • No more waiting
  • Improves safety
  • Repair punctures
  • Maintains correct air pressure
  • Extents tyre life by 30 %
  • Improves fuel economy

Industrial use

An easy Profit method----

Increase Profits by saving down time, effort , hassles and reduce repair cost.

Rubber is naturally porous and all tyres will suffer from air loss due to
porosity leaks, bead and rim leaks (due to badly fitted tyres, rusty or damaged rims) and valve leaks. An under inflated tyre will cost you more money in extra fuel (greater rolling resistance), Extra tyre wear, uneven tyre wear and are positively dangerous.

The tyre on your vehicle has been designed to run at an optimum pressure and temperature for your vehicle as recommended by the vehicle and tyre manufacturer.

Heat is the number 1 killer of tyres. Under inflated tyres run hotter, under inflated tyres also lower grip, cornering and straight line steering stability and most importantly stopping ability. Under inflated tyres are more prone to blow outs due to the extra flexing of the tyre wall and are more prone to side wall impact damage from kerbs, etc

Tyres can also be a substantial contributor to Higher Fuel cost.  Tyres that are not properly maintained can increase your fuel consumption by up to 8 %.

In addition to the above, we can eliminate 95% of your tyre deflation problems due to Punctures. This would include, Down Time, Call out Charges, New Tyres or Repairs.

Any tyre that has been treated with our product suffer deflation due to a puncturing object within the criteria then TyreTechs  International Ltd will replace or repair the Tyre FREE of charge.

An Example----

Changing a flat Dumper / wheel loader tyre wastes valuable time.

Companies take about ½ day to change a industrial flat tyre. This eats up into your valuable working time and hampers your daily activities. When you equate this with the money aspect, such as the loss of business, loss of earnings, call-out fee, you can really see the negative impact such a needless occurrence can have on you and your business

TyreTechs keeps the tyre pressure constant, keeps tyre puncture proof and extends the life of tyre up to 30 %, which saves you even more money!!

 

 
         
  © TyreTechs Inc. - All rights reserved.
For comments/questions or help. Please contact
mail@tyretechs.com