|

If you cannot find the answer to your questions here we'd be glad
to answer it for you. Please do not hesitate to contact us!
Q.
Is TyreTechs expensive ?
A. TyreTechs has the best technology and cost benefits which give excellent
value for investment for the tyre of every machin / vehicle is treated .
TyreTechs provide safety to every tyre, mimimise the inconvenience and
downtime when a puncture / air loss occours, eliminate slow air leaks /
punctures and increase tyre life.
Q .
Who are the main TyreTechs target groups?
Construction companies , plant
machinery, new & used cars, golf courses, truck, police, garbage companies
Q.
Can TyreTechs be installed in used tyres?
A. Yes, and can also use TyreTechs on any pneumatic tyre.
Q. How is TyreTchs installed ?
A.
TyreTechs is installed via the valve by a fully trained technician, and once
the tyre rotates, leaves a thin coating of product throughout the inside of
the tyre. TyreTechs does not effect the weight, handling or balance of the
tyre.
Q.
What occurs in a tyre when TyreTechs is installed?
A. TyreTechs will stop air loss, tread area wounds caused by an object up to
12mm in diameter, stop most slow leaks, maintains air pressure, lower fuel
cost, control blow-outs, and as well as extending the life of the tyre
Q.
Is TyreTechs bio-degradable and any hazard to
envirement?
A. TyreTechs contain ethylene glycol which is also used in anti freeze
products which are not regarded as hazardous. TyreTechs is bio-degradable,
and presents no problems in disposal before or after use. It flushes our
with water.with no residual stickness or compound remaining inside the tyre.
Q.
Is TyreTechs corrode the steel belting in tyres?
A. No, TyreTechs provide protection. 1) Keeping the tyre inflated, the
normal pressure is maintained which in turn prevents inward water seepage 2)
Corrosion inhibitors in the formulations will protect the steel belting 3)
The plug formed by the product will keep water from penetrating through the
hole in the tyre into belting.
Q.
What is the shelf life of TyreTechs?
A. Indefinite -as long as the container is kept sealed and no evaporation
occurs. TyreTechs will not dry out.
Q.
Must a tyre be run after a penetrating object has been removed?
A. Yes, although TyreTechs has covered the wound area left by the puncturing
object, it has not entered the wound, therefore the tyre must be run in
order to snap open the wound and allow the TyreTechs to enter. Once again,
the vehicle must be driven after removal of the object.
Q.
Does TyreTechs react chemically with the rubber tyre?
A. No. TyreTechs is chemically inert.
Q.
Will TyreTechs rust the rim of the tyre?
A. No. TyreTechs contains anticorrosive agents to prevent corrosion from
occurring it will also help to inhibit any corrosion on the wheel prior to
installation.
Q.
Can TyreTechs be used in a tube tyre?
A. Yes. However, we are unable to guarantee its success due to the
uncertainty of the quality and condition of the tube.
Q.
What is the difference between TyreTechs and other products?
A. As TyreTechs is Glycol based it will not break down or dry up inside the
tyre, unlike many other products, which congeal and cause balancing problems
and alterations to the rubber composition of the tyre. When properly
applied, TyreTechs will not affect the balance of the tyre.
Q.
How does TyreTechs perform under extreme temperatures?
A. See "is TyreTechs affected by extreme temperatures" |